The DEWALT D28402K4-1/2-Inch Small Angle Grinder features a powerful 10 amp motor and an ergonomic body that’s easy to handle. This DEWALT likewise features an exclusive Dust Ejection System and epoxy-coated motor to provide optimal shelter of internal components.
 |
4 1/2-Inch
Small Angle Grinder Kit
At a Glance:
- 1.6-horsepower, 10 amp motor delivers 11,000 rpm
- Compact, easy-to-control tool body fits in tight places
- Dust Ejection System removes corpuscles for longer tool life
- Includes two-position side handle, lowspirited center wheel, keyless adaptable guard, wrench, and kit box
- Three-year fixed warranty, one-year free service, 90-day money-back guarantee
|
|
 |
|
Grinder features a powerful 10 amp motor, and it comes in a sturdy kit box.
View larger. |
Powerful 10 Amp Motor for Fast Material Removal
Versatile and aggressive, this little angle grinder features a 1.6-horsepower, 10 amp motor that’s designed to deliver 11,000 rpm for effective material removal. Its jam-pot design provides precise gear alignment and allows the grinder’s transmission to be smooth and quiet. Also, the low-profile gear case allows the tool to fit without apparent effort into tight spaces, so you waste less time hand finishing hard-to-reach areas.
Designed for Comfort and Convenience
Getting the occupation done speedily and efficaciously is all with regards to maneuverability. This paddle-switch tool weighs 4.6 pounds and features a switch lock-on and multiposition side handle for multiple grip options. Rubber over-mold on the side handle likewise reduces vibration and fatigue and allows for splendid control–no matter how tough the occupation is.
The grinder likewise features a keyless adaptable guard that allows for hassle-free tuning. In addition, the grinder’s corresponding wheel flanges concede it to be used with a wide range of mutual accessories.
Performance and Durability
Grinding apps invent a lot of dust and debris, which may be tough on motors and mechanisms. This grinder features a patented DEWALT Dust Ejection System, which improves durability by ejecting damaging dust atoms that enter the tool. In addition, a one-piece brush arm prevents brush hang-up due to dust or debris. For durability, this grinder’s auto-off brushes shut the tool down when the brushes need replacing, which helps you stay clear from tool harm and minimizes the cost of upkeep
Quick, Easy Wheel Changes and Maintenance
An oversized, spindle-lock button and Quick-Change wheel release keep wheel remotion tool free. A keyless adaptable guard also provides tool-free adjustment to increase productivity.
The D28402K 4-1/2-Inch Small Angle Grinder Kit comes with a DEWALT warranty package that includes a three-year fixed warranty, a one-year free service contract, and a 90-day money-back guarantee.
What’s in the Box
D28402K DEWALT 4-1/2-Inch Small Angle Grinder, two-position side handle, downhearted center wheel, keyless adaptable guard, wrench, and kit box.
Safefit 2 In 1 Carry All Valet Black Photo
Safefit 2 In 1 Carry All Valet Black Picture
Safefit 2 In 1 Carry All Valet Black Pic
Safefit 2 In 1 Carry All Valet Black Image
Safefit 2 In 1 Carry All Valet Black Pic
Safefit 2 In 1 Carry All Valet Black Photo
Most helpful customer reviews
31 of 31 people found the following review helpful.
 Wow – Nothing but grins about this grinder!
By Amanda L. Mcclure
I needed a grinder to restore an old Porsche so I went shopping. I really liked the on/off switch position on the Milwaukee grinders. Most others had these inconveniently placed switches. The D28402K’s switch is pretty good. It is very comfortable in your hand and light. And the power… OH WOW! I sharpened my lawn mower blade in just a few minutes. I can’t believe that I had sharped them by hand before.
The case in very nice. It is heavy duty plastic. There is a holder in there for your grinding and cut off wheels. The handle can be put on either side if you are left or right handed.
Bottom Line – I love it. This is my second DeWalt too. It won’t be my last.
32 of 33 people found the following review helpful.
Power to spare!
By C. Birenbaum
I needed a new grinder for grinding a concrete patio. My previous one burned out (it was a cheap one – $30, 5.8 amps). I decided to go with a good one this time. It has power to spare (10amp). Never slowed down during my grinding like my old one. It also did not get overheated like my old one. This is a great addition to my tool collection – especially Dewalt.
Even came with a carrying case.
20 of 21 people found the following review helpful.
“My first grinder”
By J.M.
I’ve used grinders at work but I’ve never owned one of my own. Now dewalt may not be top dog when it comes to technology or enervation (like Bosch or Panasonic) but they usually make simple, tough and reasonably affordable tools. That’s really about all the counts. Most grinders I’ve used seems to be about the same in design so I didn`t care much about witch I picked as long as it was a good name brand. I started my tool collection off with dewalt long ago so that’s what I have stuck with. I like that paddle switch on this one, they are fragile but easy to work with. This particular one is self off locking, there is a little bit you have to rotate to push the switch down that`s on the switch. It was a little strange at first but quickly became comfortable to do. Also this one can be held on, as most can, simple click the paddle and it turns off. The only thing I don’t like is that if you where to drop it that locking mechanism on the paddle part of the switch may brake… The handle is a simple screw in, screw out deal that you can put on ether side of it. I don’t need to cut structural members all day so the 10 amps, 11K rpm and 4-½” size are plenty for round the shop jobs. Fast and powerful enough to cut a car frame but not to fast to use mild “scotch bright” type abrasives if need be. This one has a quick change threaded washer witch can be use for cutting disks or grinding disk without needing a backing ring or spacer for proper clamping and centering.
The case has provisions for holding disks (7/8″ hole), right now I’ve got four 1/8″ cutting, one ¼ grinding and two flap wheels in the holder. The tool still fits level in the case but any more and it might not. I don’t think screw on accessories are made to fit in the holder (as it has a 5/8 thread), but there is room in the case for a crimp brush or what ever else wont fit in the disk holder.
Over all not a bad package for a hundred bucks or so.
See all 50 customer reviews…
|
Good idea, bad execution
It does the job.
Exactly as pictured
